|
|
Potting |
| Overview sorted by potting depth |
|
Select a potting depth: up to ... 2,5 mm | 3 mm | 3,8 mm | 4 mm | 5 mm | 6 mm | 6,5 mm | 8 mm | 9 mm | 11 mm 13 mm | 14 mm | 15 mm | 17 mm | 19 mm | 21 mm | variable |
| Potting depth up to 2,5 mm | |||
| Type | Picture | Pitch | Potting feature |
| Series 300 | |||
| 324-FU(-HDS) |  |
11,5 mm |
The socket terminal strip 324-FU(-HDS) can be poured by the increased foot up to 2.5 mm (0.1 in.) from the board. Potting type:  Plug-in contact inside |
| Potting depth up to 3 mm |
|
||
| Type | Picture | Pitch | Potting feature |
| Series 300 | |||
| 327-FU(-HDS) |  |
14,5 mm |
The socket terminal strip 327-FU(-HDS) can be poured by the increased foot up to 3.0 mm (0.12 in.) from the board. Potting type: Plug-in contact inside |
| Potting depth up to 3,8 mm |
|
||
| Type | Picture | Pitch | Potting feature |
| Series 99 | |||
| 990-FU(-DS) |  |
5 mm | The molding design prevents seepage of the potting material into the wire clamping area up to 3.8 mm (0.15 in.) from the board. It can be installed inside of the potting walls.  Potting type: Plug-in contact inside |
| Potting depth up to 4 mm |
|
||
| Type | Pictures | Pitch | Potting feature |
| Series 95 | |||
| 951-LH(-DS) |  |
5 mm |
Types 951-LH terminal blocks allow effective potting of PC boards up to 4 mm (0.157 in.). The molding design prevents seepage of the potting material into the wire clamping area. When terminal block is mounted on PCB edge and wire clamping area is facing outside of the board allow effective potting of PC boards up to 9 mm (0.35 in.) Potting type:  Plug-in contact outside- & inside possible |
| Potting depth up to 5 mm |
|
||
| Type | Pictures | Pitch | Potting feature |
| Series 120 | |||
| 120-M-225 |  |
5 mm |
The molding design prevents seepage of the potting material into the mating plug-in contact up to 5 mm (0.197 in.) from the board. It can be installed inside of the potting walls. Potting type: Plug-in contact inside |
| Potting depth up to 6 mm |
|
||
| Type | Picture | Pitch | Potting feature |
| Series 110 | |||
| 110-P-211 |  |
3,5 mm |
Types 110-P-211 terminal blocks have been specially designed to allow effective potting of PC boards up to 6 mm (0.25 in) when terminal block is mounted on PCB edge and mating plug-in contact is facing outside of the board. Potting type: plug-in contact outside
|
 | |||
| 110-P-215 |  |
3,5 mm |
Types 110-P-215 terminal blocks have been specially designed to allow effective potting of PC boards up to 6 mm (0.25) when terminal block is mounted on PCB edge and mating plug-in contact is facing outside of the board. Potting type: plug-in contact outside |
| Series 95 | |||
| 951-HG(-DS) |  |
5 mm |
These blocks have a closed back (-HG designation) to allow the effective use of potting compounds up to 6 mm (0.25 in.) when terminal block is mounted on PCB edge and wire clamping area is facing outside of the board. . Potting type: Plug-in contact outside- & inside possible |
| Potting depth up to 6,5 mm |
|
||
| Type | Picture | Pitch | Potting feature |
| Series 900 | |||
| 900-F-S-5 |  |
5 mm |
The Tab terminal series 900, one of the most variable WECO products, with its enormeous variety of different tab types and their mixed mounting, now supplemented by a new feature: The moulding has been raised and is now pottable up to 6,5 mm (0.25 in) from the board without affecting the blade connection area. The casting resin can penetrate from below due to special "feet". Potting type: Plug-in contact inside |
 | |||
| 900-F-S-7,5 | |
7,5 mm |
The tab terminal series 900, one of the most variable WECO products, with its enormeous variety of different tab types and their mixed mounting, now supplemented by a new feature: The moulding has been raised with special "feet" and is now pottable up to 6,5 mm (0.25 in) from the board without affecting the blade connection area. The casting resin can penetrate from below due to the "feet". Potting type: Plug-in contact inside |
| Potting depth up to 8 mm |
|
||
| Type | Picture | Pitch | Potting feature |
| Series 120 | |||
| 120-M-211 |  |
5 mm |
Types 120-M-211 terminal blocks have been specially designed to allow effective potting of PC boards up to 8 mm (0.315 in.) when terminal block is mounted on PCB edge and mating plug-in contact is facing outside of the board. Potting type: Plug-in contact outside |
| |||
| 120-M-221 |  |
5 mm |
The molding design prevents seepage of the potting material into the mating plug-in contact up to 8 mm (0.315 in.) from the board. It can be installed inside of the potting walls. Potting type: Plug-in contact inside |
| |||
| 120-M-221-SMD |  |
5 mm |
The molding design prevents seepage of the potting material into the mating plug-in contact up to 8 mm (0.315 in.) from the board. It can be installed inside of the potting walls. Potting type: Plug-in contact inside |
| |||
| 120-M-221-THR |  |
5 mm |
The molding design prevents seepage of the potting material into the mating plug-in contact up to 8 mm (0.315 in.) from the board. It can be installed inside of the potting walls. Potting type: Plug-in contact inside |
| |||
| 120-M-251 |  |
5 mm |
The two-tier version type 120-M-251 pin strip is specially designed to allow effective potting of PC boards up to 8 mm when terminal block is mounted on PCB edge and mating plug-in contact is facing outside of the board. Potting type: Plug-in contact outside |
| |||
| 120-M-261 |  |
5 mm |
The two-tier version type 120-M-261 pin strip is specially designed to allow effective potting of PC boards up to 8 mm (0.315 in.) when terminal block is mounted on PCB edge and mating plug-in contact is facing outside of the board. Potting type: Plug-in contact inside |
| Series 121 | |||
| 121-M-251 | |
5,08 mm |
The two-tier version 121-M-251 pin strip is specially designed to allow effective potting of PC boards up to 8 mm when terminal block is mounted on PCB edge and mating plug-in contact is facing outside of the board. Potting type: Plug-in contact outside |
| |||
| 121-M-261 | |
5,08 mm |
The two-tier version 121-M-261 pin strip is specially designed to allow effective potting of PC boards up to 8 mm (0.315 in.) when terminal block is mounted on PCB edge and mating plug-in contact is facing outside of the board. Potting type: Plug-in contact inside |
| Series 140 | |||
| 140-B-111 |  |
5 mm |
The molding design prevents seepage of the potting material into the wire clamping area up to 8 mm (0.315 in.) from the board. Potting type: Plug-in contact outside |
| |||
| 140-E-253 |  |
5 mm |
The molding design prevents seepage of the potting material into the wire clamping area up to 8 mm (0.315 in.) from the board. Potting type: Plug-in contact outside- & inside possible |
| Series 95 | |||
| 950-LH(-DS) |  |
5 mm |
Types 950-LH terminal blocks have been specially designed to allow effective potting of PC boards up to 8 mm (0.315 in.) when terminal block is mounted on PCB edge and wire clamping area is facing outside of the board. Potting type: Plug-in contact outside |
| Series 97 | |||
| 970-LH(-DS) |  |
5 mm |
Types 970-LH terminal blocks have been specially designed to allow effective potting of PC boards up to 8 mm (0.315 in.) when terminal block is mounted on PCB edge and wire clamping area is facing outside of the board. Potting type: Plug-in contact outside |
| Potting depth up to 9 mm |
|
||
| Type | Picture | Pitch | Potting feature |
| Series 95 | |||
| 951-LH(-DS) | |
5 mm |
Types 951-LH terminal blocks allow effective potting of PC boards up to 4 mm (0.157 in.). The molding design prevents seepage of the potting material into the wire clamping area. When terminal block is mounted on PCB edge and wire clamping area is facing outside of the board allow effective potting of PC boards up to 9 mm (0.35 in.) Potting type: Plug-in contact outside- & inside possible |
| Series 97 | |||
| 971-LH(-DS) |  |
5 mm |
Types 971-LH terminal blocks allow effective potting of PC boards up to 9 mm (0.35 in.). The molding design prevents seepage of the potting material into the wire clamping area. When terminal block is mounted on PCB edge and wire clamping area is facing outside of the board allow effective potting of PC boards up to 13 mm (0.51 in.) Potting type: Plug-in contact outside- & inside possible |
| Potting depth up to 11 mm |
|
||
| Type | Picture | Pitch | Potting feature |
| Series 120 | |||
| 120-M-227 |  |
5 mm |
The molding design prevents seepage of the potting material into the mating plug-in contact up to 11 mm from the board. It can be installed inside of the potting walls. Potting type: Plug-in contact inside |
| Potting depth up to 13 mm |
|
||
| Type | Picture | Pitch | Potting feature |
| Series 120 | |||
| 120-M-181/-281 |  |
5 mm |
The molding design prevents seepage of the potting material into the mating plug-in contact up to 13 mm (0.51 in.) from the board. It can be installed inside of the potting walls. The plug-in contact can be outside and inside of the potting walls. Potting type: Plug-in contact outside & inside possible |
| |||
| 120-M-191 |  |
5 mm |
120-M-191 (without sidewalls): the molding design prevents seepage of the potting material into the mating plug-in contact up to 13 mm (0.51 in.) from the board. It can be installed inside of the potting walls. Potting type: Plug-in contact inside |
| |||
| 120-M-295 |  |
5 mm |
The molding design prevents seepage of the potting material into the mating plug-in contact up to 13 mm (0.51 in.) from the board. It can be installed inside of the potting walls. Potting type: Plug-in contact inside |
| Series 121 | |||
| 121-M-181/-281 | |
5,08 mm |
The molding design prevents seepage of the potting material into the mating plug-in contact up to 13 mm from the board. It can be installed inside of the potting walls. The plug-in contact can be outside and inside of the potting walls. Potting type: Plug-in contact outside & inside possible |
| |||
| 121-M-191 | |
5,08 mm |
121-M-191 (without sidewalls): the molding design prevents seepage of the potting material into the mating plug-in contact up to 13 mm from the board. It can be installed inside of the potting walls. Potting type: Plug-in contact inside |
| Potting depth up to 14 mm |
|
||
| Type | Picture | Pitch | Potting feature |
| Series 97 | |||
| 970-HEN(-DS) with cover -HENO |
 |
5 mm |
The molding design prevents seepage of the potting material into the wire clamping area up to 14 mm (0.55 in.) from the board. Potting type: Plug-in contact outside |
| |||
| 978-HEN(-DS) with cover -HENO |
|
5 mm |
The molding design prevents seepage of the potting material into the wire clamping area up to 14 mm (0.55 in.) from the board. Potting type: Plug-in contact outside & inside possible |
| Potting depth up to 15 mm |
|
||
| Type | Picture | Pitch | Potting feature |
| Series 110 | |||
| 110-P-225 | |
3,5 mm |
The molding design prevents seepage of the potting material into the mating plug-in contact up to 15 mm (0.59 in.) from the board. It can be installed inside of the potting walls. Potting type: plug-in contact inside |
| Potting depth up to 17 mm |
|
||
| Type | Picture | Pitch | Potting feature |
| Series 140 | |||
| 140-E-111 |  |
5 mm |
The molding design prevents seepage of the potting material into the wire clamping area up to 17 mm (0.67 in.) from the board. Potting type: Plug-in contact outside- & inside possible |
| Potting depth up to 19 mm |
|
||
| Type | Picture | Pitch | Potting feature |
| Series 120 | |||
| 120-M-291 |  |
5 mm |
120-M-291 (with sidewalls): the molding design prevents seepage of the potting material into the mating plug-in contact up to 19 mm (0.75 in.) from the board. It can be installed inside of the potting walls. Potting type: Plug-in contact inside |
| Series 121 | |||
| 121-M-251 | |
5,08 mm |
The two-tier version 121-M-251 pin strip is specially designed to allow effective potting of PC boards up to 8 mm when the pin strip is mounted on PCB edge and mating plug-in contact is facing outside of the board. Potting type: Plug-in contact outside |
| Series 150 | |||
| 150-B-111 |  |
5 mm |
The molding design prevents seepage of the potting material into the wire clamping area up to 19 mm (0.75 in) from the board. Potting type: Plug-in contact outside- & inside possible |
| Potting depth up to 21 mm |
|
||
| Type | Picture | Pitch | Potting feature |
| Series 110 | |||
| 110-P-221 |  |
3,5 mm |
The molding design prevents seepage of the potting material into the mating plug-in contact up to 21 mm (0.83 in.) from the board. It can be installed inside of the potting walls. Potting type: plug-in contact inside |
| Potting depth variable |
|
||
| Type | Picture | Pitch | Potting feature |
| Series 97 | |||
| 971-SLR |  |
5 mm |
These pin strips, available with longer solder pins, can be poured for special applications. The possible potting depth depends on the length of the used pins. Potting type: Plug-in contact inside |
| |||
| 971-SLR-SMD-1,1 |  |
5 mm |
These pin strips, available with longer solder pins, can be poured for special applications. The possible potting depth depends on the length of the used pins. Potting type: Plug-in contact inside |
| |||
| 971-SLR-SMD-1,3 | |
5 mm |
These pin strips, available with longer solder pins, can be poured for special applications. The possible potting depth depends on the length of the used pins. Potting type: Plug-in contact inside |
| |||
| 971-SLR-THR |  |
5 mm |
These pin strips, available with longer solder pins, can be poured for special applications. The possible potting depth depends on the length of the used pins. Potting type: Plug-in contact inside |
| If you should not have found anything fitting for your application in our overview, address us, we offer also customized solutions. |