|
|
June 2011 |
| PCB connectors 970-X/971-X | ||||||||||||||||||||||||||||||
The WECO terminals 970-X and 971-X are well suited to be used as potential distributors. This allows to loop through earth conductors easily. With a pitch of 5 mm, these terminals have 2 to 12 screw terminals with only one potential (pole). We also offer the terminals as linkable versions 970-TX and 971-TX with 2 to 4 screw terminals. The products of series 970-X/970-TX have parallel wire entry, the versions 971-X/971-TX have a vertical entry to the PCB. For fastening and contacting on the PC board, the connectors have solder pins. Concerning the number and position of the pins of the individual versions, please refer to the additional data sheet of 970-X or 971-X. All versions are also available as "-DS" version, with wire protection. This prevents especially in multi-wire conductors reliably a damage that can be caused by the screw. If desired, other positions of the pins and other pin lengths are available. Even versions with an extended wire entry, other colors and designs without solder pins are part of our product range.
Please find further technical characteristics, photos and technical drawings in the correspondant data sheets.
Thank you for your interest in this WECO product. All further advantages become acquainted by a detailed consultation.
We remain at your disposal for any further information that you may require.
|
