August 2010

Head contact terminal 983-..-DAM

983-D/06-DAM and 983-S/06-DAM The head contact terminals 983-D/..-DAM and 983-S/..-DAM are based on the well proven head contact terminals of the series 983. The optimized geometry and slightly modified housing offer some advantages compared to the standard versions: The reinforced side walls can equalize the resulting torque to the outside. As a result, the reinforced side avoid the stacking without pole loss as given in the standard version. The new housing geometry creates the possibility to implement central soldering pins. The connection is designed as head contact, screw and washers forming a combination. This terminal is available from 2 to 6 poles as a version with only one soldering pin (see 983-S/..-DAM) and with two soldering pins (see 983-D/..-DAM). More information, photos and technical drawings can be seen on our data sheets. We provide 3D-STEP files upon request. The products: Head contact terminal 983-D/..-DAM • Pitch 10 mm • 2 to 6 poles • two soldering pins per pole • reinforced side walls • optimized housing geometry for more stability   Head contact terminal 983-S/..-DAM • Pitch 10 mm • 2 to 6 poles • one soldering pin per pole • reinforced side walls • optimized housing geometry for more stability Applications: Equipment technology, pumps, engines Data sheet: 983-D/..-DAM (PDF)   Data sheet: 983-S/..-DAM (PDF) Thank you for your interest in this WECO product. All further advantages become acquainted by a detailed consultation. We remain at your disposal for any further information that you may require. products@wecogroup.de