June 2010

PCB terminal 950-THR

950-THR-DS The PCB terminal 950-THR is a very successful SMarTconn product for the Through Hole Reflow application and automatic assembly. As well as all our products for the reflow soldering process, the housing of the 950-THR is made of a high temperature resistant material. Small spacers on the bottom ensure sufficient space for the solder paste and allow good air circulation for proper soldering and an optical solder joint inspection. The soldering pins of the PCB terminal have at a standard board thickness of 1.6 mm on the rear of the PCB a small overlap. The resulting solder joint on both sides of the PCB guarantees an optimal fitting. The position of the solder pins allows the same minimal surface occupancy on the board as in case of wave soldering. More information, photos and technical drawings can be seen on our data sheets. Upon request, we provide 3D-STEP files. The product: PCB terminal 950-THR • Pitch 5 mm • 2 to 12 poles • high temperature resistant material • secure attachment • available in box or in Tape & Reel Applications: Equipment technology Data sheet: PCB terminal 950-THR (PDF) more products for THR Thank you for your interest in this WECO product. All further advantages become acquainted by a detailed consultation. Please ask for more detailed information. We would be delighted to send a sample in advance. We remain at your disposal for any further information that you may require. products@wecogroup.de