April 2010

PCB Plug connector 950-FL-DS

950-FL-DS The connectors 950-FL-DS with screw and a special spring-wire protection combination allow a two plug-in direction - both from the bottom and from the top - to header series 971-SLR. This opens the way to a wide range of applications. Designed for a rated diameter of 1,5 mm², which allows a terminal area of 0,34 mm² - 2,5 mm² rigid, they are available in a number of poles from 2 - 24. In addition to our standard version 950-FL-DS, we have other designs with different geometries of the connectors in our product range. This allows for example models with lateral ribs or a ground-fastening contour to fasten of the connector. Beside a version of reduced height, there are also special versions available, which provide a reduced insertion and withdrawal force especially in parts with a high number of poles. more products of series 950-FL The counterpart pin strips 971-SLR basically consist of a high temperature-resistant plastic body and pins with two different designs and diameters and a large number of differing lengths in the soldering and mating area. Both, THT and the THR / SMD technology can thus be covered. Pin Strips series 971-SLR More information, photos and technical drawings can be found on our individual data sheets. Upon request we provide 3D-STEP files. The product: PCB Plug connector 950-FL-DS • Pitch 5 mm • 2 to 24 poles • two-sided plug direction • other models with different geometries • multiple applications Applications: Equipment technology Data sheet: PCB Plug connector 950-FL-DS (PDF) Thank you for your interest in this WECO product. All further advantages become acquainted with you best by a detailed consultation. Please ask for more detailed information. We would be delighted to send a sample in advance. We remain at your disposal for any further information that you may require. products@wecogroup.de