February 2010

Pin strip 931-SLR-THR-1,1

931-SLR-THR-1,1 We extended our pinstrip family. In addition to the previous series 971-SLR-THR-1,1, there is a new pin strip for the application in a reflow soldering process with pitch of 3,5 mm in our program range. Like the 971-SLR-THR-1,1 the 931-SLR-THR-1,1 has a constant pin diameter of ø 1.1 mm. The heat-resistant plastic housing has a very high CTI value, and is equipped with spacers, so-called "stand-offs" to ensure the reflow solder process with a better hot-air circulation. In addition, they provide an improved optical control of the solder joint. All THR (Through Hole Reflow) and SMD (Surface Mounted Device) pin strips of this series are packed in tape on reel for automatic assembling. Furthermore, they are equipped with high temperature resistant pick caps which can easily be removed after the soldering process. The pin strip 931-SLR-THR-1,1 was designed for use with our counterpart, the connectors of series 930-FL-DS. For the 931-SLR series with a pin diameter of ø 1,3 mm the connector 938-FLDS is available. The product: Pin strip 931-SLR-THR-1,1 • Pitch 3,5 mm • 2 to 16 poles • Plug and solder side ø 1,1 mm • Other plug and solder pin lengths on request • PicCaps for automatic assembly Applications: Equipment technology Data sheet: Pin strip 931-SLR-THR-1,1 (PDF) Thank you for your interest in this WECO product. All further advantages become acquainted with you best by a detailed consultation. Please ask for more detailed information. We would be delighted to send a sample in advance. We remain at your disposal for any further information that you may require. products@wecogroup.de