|
|
February 2009 |
| Pin strip 971-SLT-SMD | ||||||||||||||||
WECO extends its product range of reflow soldering connectors in true SMD technology with 5 mm pitch with this pin strip for special applications. In contrary to the well-known pin rows 971-SLR and 971-SLR-THR, for which drillings in the PCB are necessary, the SMD types of WECO base on true surface assembly. Big solder pin heads guarantee optimal retention force on the printed circuit board. The pin strip 971-SLT-SMD comes with a constant pin diameter of 1.1 mm at the plug-in area. Plug-in direction perpendicular to PCB and wire entrance parallel to PCB when plugged with WECO plug connectors (choices see datasheet). We do recommend it for the use with higher numbers of poles, in order to minimize the plug-in and withdrawal forces. This pin strip is characterized by a very low housing profile and has a much smaller total overall height compared with the other SMD pin strips of WECO. Thus, it is in the best way suitable for place-critical applications and applies where a limited height is given. The housings of the SMD series are made of high temperature resistant plastic material that is used in our THR series. For the automatic assembling process the pin strips are packed in Tape-on-Reel and are equipped with high temperature resistant pick caps, which can easily be removed after the soldering process.
Please find further technical characteristics, photos and technical drawings in the correspondant data sheets.
Thank you for your interest in this WECO product. All further advantages become acquainted by a detailed consultation.
We remain at your disposal for any further information that you may require.
|
