General Description
Flat Screw Terminals |
|
 |
 These terminals comprise a glazed steatite
mount and two rivetted flat-type screw terminals
secured to prevent them from twisting,
similar to DIN 41000, with binding
clip C or D and spring washers B DIN 127.
The blocks may either be used railmounted
or independently. The base has a
longitudinal slot at the bottom for non-twist
securing on mounting rails 16 mm x 3 mm
(0.63 x 0.12 in).The surfaces next to the
screw-fixing hole can be used for marking
purposes. |
|
|
Catalogue group E 
Choose here