General Description Double-Mantle Terminals MD, MUD, DFD |
|
 |
These types are available only with thread
in base, but chooseable are the upper sections
of M, MU und DF described on the
previous page with their specific qualities.
The double terminals also afford the possibility
of connecting incoming and outgoing
lines independently. The terminal lower
sections up to 25/35 mm2 (3/2 AWG) are
provided with a mounting hole for securing
at the center. As from 50/70 mm2 (1/0 / 2/0
AWG) the terminals are manufactured with
two bolt-on holes (see extention c) and
none at the center. The upper sections of
terminals 37-MUD also have additional
22 mm/0.87 in wrench flats as standard
and the upper sections DFD-6 have a
24 mm/0.94 in width across flats hexagon
head. |
|
| Type |
Connecting- Capacity |
Max. Terminalspace |
|
 |
Choose here |
|
29-MD |
1x6 mm˛ |
3,1x4 mm |
|
30-MD |
1x10/16 mm˛ |
5,1x7 mm |
|
31-MD |
1x25/35 mm˛ |
7,5x9 mm |
|
32-MD |
1x50/70 mm˛ |
10,5x13 mm |
 |
|
33-MUD |
1x6 mm˛ |
3,1x4 mm |
|
34-MUD |
1x10/16 mm˛ |
5,1x7 mm |
|
35-MUD |
1x25/35 mm˛ |
7,5x9 mm |
|
36-MUD |
1x50/70 mm˛ |
10,5x13 mm |
 |
|
DFD-1 (-AX) |
1x6 mm˛ |
3,1x4 mm |
|
DFD-3 (-AX) |
1x10/16 mm˛ |
5,1x7 mm |
|
DFD-4 |
1x25/35 mm˛ |
7,5x9 mm |
|
DFD-5 (-AX) |
1x50/70 mm˛ |
10,5x13 mm |
|
DFD-6 (-AX) |
1x95/120 mm˛ |
15x18 mm |
|