General Description Tabs for Equipment |
|
 |
These tabs are attached directly to equipment,
e.g. as an earth terminal, and are suitable
for receptacles according to DIN
46247, with the nominal sizes 2,8; 4,8 or
6,3x0,8 (up to 1/2,5/6 mm2 rated cross-section
and 6/16/25 A current carrying capacity,
according to DIN 46249).
Unlike to the other connectors , these tab connectors have an additional
screw connection. Connection is easy without
any need for special conductor arrangement.
The SAK tab connectors have turned-
up sides next to the screw terminal.
This prevents the conductor from spreading.
In the case of screw connections without
SAK, spread protection will have to be
provided on the equipment. |
|
|