Overview Catalouge group C Socket terminal strips series 300

Socket terminal strips series 300
These screw terminal strips are used for connecting stripped, unterminated, stranded or solid copper wires, ranging from 2,5 up to 16 mm² (14 - 5 AWG) and voltages up to 500 V. All types are available from 1 to 12 poles and can easily be cut into the required length. A mounting hole is provided between every circuit. The flexible polyamide moulding allows use on uneven surfaces. Each circuit of those terminal strips with the indication "HDS" has a wire protector to prevent damage to the wire by the turning screw. The screws are protected against working loose and cannot be lost. They are backed out and ready for wiring.

Similar products:
Socket Terminal strips as plug-in terminal strips

Image Product Description Download
8 mm pitch
302 (-HDS) 8 mm pitch,
Standard Version,
w/o. HDS: 0,75 - 4 mm² / 18 - 14 AWG
w. HDS: 0,75 - 2,5 mm² / 18 - 16 AWG
17,5 A
302-N (-HDS) 8 mm pitch,
Low profile version,
w/o. DS: 0,75 - 4 mm² / 18 - 14 AWG
w. DS: 0,75 - 2,5 mm² / 18 - 16 AWG
17,5 A
10 mm pitch
323 (-HDS) 10 mm pitch,
Standard Version,
w/o. HDS: 0,75 - 6 mm² / 18 - 12 AWG
w. HDS: 0,75 - 4 mm² / 18 - 14 AWG
24 A
323-FU-16,5 (-HDS) 10 mm pitch,
raised base: total height 16,5 mm,
w/o. HDS: 1 - 6 mm² / 18 - 12 AWG
w. HDS: 1 - 4 mm² / 18 - 14 AWG
24 A
323-FU-18,5 (-HDS) 10 mm pitch,
raised base: total height 18,5 mm,
w/o. HDS: 1 - 6 mm² / 18 - 12 AWG
w. HDS: 1 - 4 mm² / 18 - 14 AWG
24 A
323-PHFBW (-DS) 10 mm pitch,
raised base: total height 18,5 mm,
w/o. DS: 1 - 6 mm² / 18 - 12 AWG
w. DS: 1 - 4 mm² / 18 - 14 AWG
10 A / 24 A
11,5 mm pitch
324 (-HDS) 11,5 mm pitch,
Standard version,
w/o. HDS: 1 - 10 mm² / 16 - 10 AWG
w. HDS: 0,75 - 6 mm² / 18 - 12 AWG
32 A
324-FU (-HDS) 11,5 mm pitch,
raised base: total height 16,5 mm,
w/o. HDS: 1,5 - 10 mm² / 16 - 10 AWG
w. HDS: 1,5 - 6 mm² / 16 - 12 AWG
32 A
14,5 mm pitch
326 (-HDS) 14,5 mm pitch,
w/o. HDS: 2,5 - 16 mm² / 14 - 8 AWG
w. HDS: 2,5 - 16 mm² / 14 - 10 AWG
57 A
327 (-HDS) 14,5 mm pitch,
w/o. HDS: 4 - 16 mm² / 12 - 8 AWG
w. HDS: 4 - 16 mm² / 12 - 8 AWG
76 A
327-FU (-HDS)
14,5 mm pitch,
raised base
w/o. HDS: 4 - 16 mm² / 12 - 8 AWG
w. HDS: 4 - 16 mm² / 12 - 8 AWG
76 A, up to 800 V
Accessories
Jumpers
302-J, 323-J, 324-J, 327-J 		suitable for the types of series 302 to 327
Marking strips
BST-302 to BST-326 		suitable for the types of series 302 to 327
Cover
A-323 		Contact protection in combination with base plate B-323 for 323, 323-FN and 323-FU-16,5
Base plate
B-323 		Contact protection in combination with cover A-323 for 323, 323-FN and 323-FU-16,5