Series 122: Plug connectors and pin strips

This series of plug-in connectors with a pitch of 7.5 mm allows higher rated voltages under industrial conditions. It consists of plug connectors with screw and soldered pin strip connectors. The vibration resistance of the connection is supported by latching the housings together. For the screw connection lift system is used, which guarantees even after serveral connections of a wire under high contact pressure, an fatigue-proof wire protector. All types are available in 2- to 24-pole design. The screws are captive. The pin strip connectors are featured with grooves for the coding elements 120-K. The terminals are unmarked as standard, but are available printed on request.

Image		Product		Description	Download
Plug connectors, Wire entry parallel to direction of insertion
		122-A-111		7,5 mm pitch 0,2 - 2,5 mm² / 26 - 12 AWG 12 A
Plug connectors, Wire entry vertical to direction of insertion
		122-D-111		7,5 mm pitch 0,2 - 2,5 mm² / 26 - 12 AWG 12 A
		122-D-121		7,5 mm pitch wire termination on side of locking catch 0,2 - 2,5 mm² / 26 - 12 AWG 12 A
Pin strips, Direction of insertion parallel to PCB
		122-M-111		7,5 mm pitch, without side walls, 12 A
		122-M-211		7,5 mm pitch, with side walls, 12 A
Pin strip connector, Direction of insertion vertical to PCB
		122-M-121		7,5 mm pitch, without side walls, 12 A
		122-M-221		7,5 mm pitch, with side walls, 12 A
Accessories
		Coding element 120-K		Coding elements for the pin strip connectors series 110, 120, 121 and 122