Series 971-KRFBS, 970-KA, -KB, -KE

To prevent accidental disconnection, plug and header are made to interlock. To prevent accidental interchanging of blocks the headers 970-KA and 971-KS can be coded with the keying pins 97-KPL and 97-KKL both together. These have to be inserted into the keying slots of the header and then correspond with nippers on top of the 971-KRFBS(-DS) moulding. Instead of using the plug 971-KRFBS(-DS), one may alternatively use our 971-FBS(-DS) without the advantage of interlocking and keying. The rear tier pin block row is offset by half a nominal spacing - 2,5 mm (0.10 inch) - with respect to the front row.

Image		Product		Description	Download
Federleisten
		971-KRFBS (-DS)		5 mm spacing direction of insertion parallel to PCB, w/o. DS: 1 - 6 mm² / 16 - 10 AWG w. DS: 0,75 - 4 mm² / 18 - 12 AWG 10 A
Pin Strips
		970-KA		5 mm spacing with support, direction of insertion parallel to PCB, 10 A
		970-KB		5 mm spacing without support, direction of insertion parallel to PCB, 10 A
		970-KE		5 mm spacing Tier version direction of insertion parallel to PCB, 10 A
		971-KS		5 mm spacing direction of insertion vertical to PCB, 10 A