Overview Catalogue group A PCB Connectors Lift system Series 150/152

Series 150/152 Multilift
These connectors with extra large clamping area have a lift-terminal which guarantees a high pressure fitting and a fatigue strength wire protection even after countless disconnections. All types have captive screws and a dovetail inter-locking system with 2 or 3 poles per strip. Having to keep on the shelf only two block sizes, they can be combined to any request strip size, ensuring perfect support and precise alignment. The types 150-A-111 and 150-C-111 have a test hole for a test plug with a diameter of 2.3 mm. The high 150-B version can be used either on its own, e.g. on encapsulated circuits or in combination with the 150-A as a tier terminal. This provides a high wiring density in a confined space. Both rows are offset by half a nominal pitch and can be configured as required. To simplify fitting, the rear solder pins protrude furt- her from the housing than the front pins. The 45°-version is specially suitable for the use admidst of the PC-board or in serveral lines one behind the other. The screw locks provide resistance to slackening and loss.

Image Product Description Download
Wire entry parallel to PCB
150-A-111 5 mm pitch
interlocking, with test hole,
0,14 - 4 mm² / 26 - 14 AWG
24 A
150-B-111
5 mm pitch
interlocking,
Tall version,
0,14 - 4 mm² / 26 - 14 AWG
24 A
150-B-151 5 mm pitch
interlocking, two-tier version,
Front connector is offset to the right,
0,14 - 4 mm² / 26 - 14 AWG
16 A
150-B-153 5 mm pitch
interlocking, two-tier version,
Front connector is offset to the right,
0,14 - 4 mm² / 26 - 14 AWG
16 A
152-A-111 Pitch 7,5 mm
interlocking, with test hole
0,14 - 4 mm² / 26 - 14 AWG
24 A
152-A-211 Pitch 7,5 mm
interlocking, with test pick-off
0,14 - 4 mm² / 26 - 14 AWG
24 A
Wire entry vertical to PCB
150-A-121 5 mm pitch
interlocking, with test hole,
0,14 - 4 mm² / 26 - 14 AWG
24 A
152-A-121 Pitch 7,5 mm
interlocking, with test hole
0,14 - 4 mm² / 26 - 14 AWG
24 A
152-A-221 Pitch 7,5 mm
interlocking, with test pick-off
0,14 - 4 mm² / 26 - 14 AWG
24 A
Wire entry 45° to PCB
150-C-111 5 mm pitch
interlocking, with test hole,
0,14 - 4 mm² / 26 - 14 AWG
24 A