Marking

WECO offers marking of individual connections for nearly all terminals and products.
Marking can be carried out by either pre-fabricated self-adhesive marking strips or by InkJet printing.

Marking strips
Self-adhesive marking strips consist of polyester with black print on silver background. They are scratch-proof and surface-sealed with Mylar.

The numbering begins with 1. The last digit represents the indicated number of poles

Marking strips withstand PC board cleaning processes using water and soap, Freon, fluorinated or chlorinated cleaning agents. However, they are not reflow-capable and should therefore only be mounted downstream the reflow soldering process.
Marking strips are delivered in ten strips per sheet.

Part number Type Marking Pitch Length (L) Width (a) PU
24.499.013 BST-3,50/24 1 2 3 ... 24 3,50 mm 84 mm 3 mm 100
24.499.009 BST-5,00/12 1 2 3 ... 12 5,00 mm 60 mm 3,5 mm 100
24.499.010 BST-5,00/32 1 2 3 ... 32 5,00 mm 160 mm 3,5 mm 100
24.499.006 BST-5,08/12 1 2 3 ... 12 5,08 mm 61 mm 3,5 mm 100
24.499.007 BST-5,08/32 1 2 3 ... 32 5,08 mm 162 mm 3,5 mm 100
24.499.012 BST-7,50/19 1 2 3 ... 19 7,50 mm 141 mm 3,5 mm 100
24.499.011 BST-10,00/16 1 2 3 ... 16 10,00 mm 155 mm 3,5 mm 100
24.499.008 BST-10,16/16 1 2 3 ... 16 10,16 mm 157 mm 3,5 mm 100

InkJet printing
As an alternative to self-adhesive marking strips, we also offer markings according to your specific requirements.
Our products are marked by means of inkjet printers. Micro-sized ink droplets are shot accurately to the point and guided by an electric field thus creating the high-precision print – very much like a printed pattern generated by a common matrix printer. This process is fast, easy-to-use and reprogrammable. However, this printing process comprises of the contour precision of the print. In addition to numbers and letters, special characters can also be printed.
The inkjet print features tried and tested scratch- and wipe-resistance.

Standard marking for PCB connectors comes in either black or white - depending on the housing colour. The marking is printed on given surfaces.

Markings for our connectors featured in catalogue 7 are printed in black.
Markings may be printed in two locations: either on or between the screw guides (for series 302 only on the screw guides).

Alternatively, WECO offers for special colours pad printed markings. Due to the elaborate handling it makes this printing method, however, significantly more expensive.


InkJet printing
(graphic illustration)